Nokia PD-1 User Manual
                                | |
Contents
| 
U s i n g t h e I m a g e A l b u m21Copyright © 2004 Nokia. All rights reserved.To assign a short name for a paired device:Define a short name to help you recognise a certain device. This name isstored in the Image Album memory and cannot be seen by other deviceusers.1 Press Options > Advanced > Settings, select Bluetooth > Paireddevices.2 Press Change, select the paired device from the list, press Options >Assign short name. Write the short name and press OK.■ Printing imagesYou can print images with a compatible Bluetooth-enabled printer.1 Open an image and press Options > Print.2 The Image Album starts to search for devices within range. Devicesusing Bluetooth wireless technology that are within range start toappear on the display one by one.If you have searched for Bluetooth devices earlier, a list of thedevices that were found previously is shown first. To start a newsearch, press More devices.3 Select the desired printer and press Select.4 Enter the passcode of the printer, if prompted.■ Connecting to a PCYou can connect the Image Album to a compatible PC and make backupcopies of your files.1 Make sure the Image Album is on and the standby light is green.2 Connect the USB cable of a compatible PC to the USB connector ofthe Image Album, see “Figure 2” on page 7.3 To ensure that the file system check is not running on the ImageAlbum, press the right scroll key.The Image Album can now be seen as a removable drive on the PC.Note that you cannot use the Image Album while it is connected to a PC. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine