Nokia RM-339 User Manual

Contents

Nokia RM-339 User Manual Manual pdf 57 page image

577. Use the Alphanumeric keypad to enter the passkey of the headset you want topair with and press the OK key.8. Your phone will then pair with the headset.Note: The phone automatically attempts to send a passkey of “0000” tothe device and shows the message “ATTEMPTING TO AUTO PAIR.” Thedefault PIN code is usually 0000. Refer to the Bluetooth accessory’s userguide for additional information.■ Sounds SettingsTo adjust volumes and assign sounds to phone calls and alarms. From StandbyMode, select MENU > Settings & Tools > Sounds Settings and from the following:1. Call Sounds — To set ringtones for incoming calls. Select Call Ringtone, scrollto the desired ringtone, and press OK. To set the phone to vibrate whenreceiving a call, select Call Vibrate > On.2. Alert Sounds — Select the alert type (Tone, Vibrate, or Reminder) for anincoming text message, picture message, or voicemail. Select Emergency Toneto set the alert type (Alert, Vibrate, or Off) for emergency dialing.3. Keypad Volume — To set the volume for the keypad, press the Directional keyUp and Down (this option only works when the master volume is not set to AllSounds Off, Alarm Only, or Vibrate Only by pressing the Volume keys, see"Phone at A Glance", p. 10).4. Service Alerts — To activate an alert.• ERI — Enhanced roaming indicator (ERI) displays the status of the mobileservice (network service). The status can be "Verizon Network", "ExtendedNetwork", or "Roaming". See "Banner", p. 58.• Minute Beep — To sound an alert every minute while in a call.• Call Connect — To alert you when a call is connected.5. Power On/Off — To enable or disable tones when your phone is turned on or off(this option only works when the master volume is not set to All Sounds Off,Alarm Only, or Vibrate Only by pressing the Volume keys, see "Phone at AGlance", p. 10).■ Display SettingsTo modify the look and feel of the display. From Standby Mode, select MENU >Settings & Tools > Display Settings.Draft— To set ringtones for incoming calls. SelectDraft— To set ringtones for incoming calls. Select. To set the phone to vibrate whenDraft. To set the phone to vibrate when.Draft.— Select the alert type (Draft— Select the alert type (ToneDraftTone,Draft, VibrateDraftVibrate, orDraft, or ReminderDraftReminderincoming text message, picture message, or voicemail. SelectDraftincoming text message, picture message, or voicemail. SelectVibrateDraftVibrate, orDraft, or OffDraftOff) for emergency dialing.Draft) for emergency dialing.Off) for emergency dialing.OffDraftOff) for emergency dialing.Off— To set the volume for the keDraft— To set the volume for the keDraftypad, press the Directional keyDraftypad, press the Directional keyUp and Down (this option only works when the master volume is not set toDraftUp and Down (this option only works when the master volume is not set toAlarm OnlyDraftAlarm Only, orDraft, orAlarm Only, orAlarm OnlyDraftAlarm Only, orAlarm Only Vibrate OnlyDraftVibrate Only by pressing the Volume keys, seeDraftby pressing the Volume keys, seeVibrate Only by pressing the Volume keys, seeVibrate OnlyDraftVibrate Only by pressing the Volume keys, seeVibrate Only"Phone at A Glance", p. 10).Draft"Phone at A Glance", p. 10).— To activate an alert.Draft— To activate an alert.— Enhanced roaming indicator (ERI) displays the status of the mobileDraft— Enhanced roaming indicator (ERI) displays the status of the mobileservice (network service). The statusDraftservice (network service). The status