Nokia Sleep Installation And Operating Instructions Manual

Also see for Nokia Sleep: Installation guide Quick installation guide

Nokia Sleep Installation And Operating Instructions Manual Manual pdf 35 page image

EN - 35Nokia Sleepv1.0 | April 2018Performing a factory reset of your Nokia SleepAll data that wasn't synced before resetting your Nokia Sleep will be lostpermanently.Factory resetting your Nokia Sleep allows you to delete all of the data stored on it. Factoryresetting completes the dissociation process.Factory resetting your Nokia Sleep will not remove any of the data that wassynced from the Nokia Health Mate® app.To reset your Nokia Sleep, perform the following steps:1. Go to the Settings of your mobile device, select Bluetooth and locate Nokia Sleep inthe list of devices. Select the small icon to the right of the sleep sensor and select theoption to Forget or Remove the device.2. Make sure to place the inner part of the Nokia Sleep out of its textile cover.3. Put the lower part of the device towards you.A notch with the word Reset below indicates the location of the reset button.4. Unplug, then plug Nokia Sleep using the provided adapter.5. Press and hold the Reset button for five seconds.The LED on the back of the device will flash red three times, then flash greencontinuously one time.A flashing blue LED indicates that the reset procedure has been done successfully.6. Put the inner part back into the textile cover.Make sure to flatten the sensor all over its surface in the textile cover.