Set which SIM card to useBy default, your phone asks you which SIM to use for the connection. You can also set the defaultSIM for calls, messaging, and mobile data connections.Select which SIM to use for calls and messaging1. Tap > Dual SIM.2. Switch Always ask to OFF .3. Select which SIM to use for calls and messaging.Select which SIM to use for mobile data connectionsTap > Mobile data and networks, and select which SIM to use for mobile data connections.Availability of SIMs• You can use 2G or 3G SIMs in both SIM1 and SIM2 slots, but the SIM2 slot supports 2G networkonly.• When you set one SIM to be used for outgoing calls or messages, or for data connections, theother SIM can still receive calls or messages.• When one SIM is having an active connection, the other SIM is not available.Charge the batteryYour battery has been partially charged at the factory, but you may need to recharge it before youcan use your phone.1. Plug the charger into a wall outlet.2. Connect the charger to the phone. When done, unplug the charger from the phone, then from thewall outlet.If the battery is completely discharged, it may take several minutes before the charging indicator isdisplayed or before any calls can be made.Tip: You can use USB charging when a wall outlet is not available. Data can be transferred whilecharging the device. The efficiency of USB charging power varies significantly, and it may takea long time for charging to start and the device to start functioning.Copy contacts from your old phoneEasily get your contacts to your new phone.To copy contacts from your old phone, you must have copied them from your old phone to the SIMcard and placed the SIM card in your new phone.1. Tap .2. Swipe up from the bottom of the screen, and tap Import/export > Import from SIM.© 2014 Microsoft Mobile. All rights reserved. 6