Nokia X2-01RM-709/RM-717Service Manual Level 1&219 Confidential | Copyright © 2010 Nokia | All rights reserved Version 2.010. ASSEMBLY INSTRUCTIONS1) Tighten the four TORX+ size 6 screws to the torqueof 18 Ncm in the order shown.2) Connect the DISPLAY connector. Be careful not todamage the connector.3) Make sure that the shown guiding pins arecorrectly aligned.4) Press the DISPLAY FLEX down to make an angle toit. Be careful not to damage the connector.6) This is wrong. If the flex is facing upwards, youmust press it down towards the connector.5) Make sure that the DISPLAY connector flex iscorrectly aligned and flat like shown in the picture.