17Copyright © 2004 Nokia. All rights reserved.• Change view - You can define how many fields (2, 4, or 6) are shown on theTrip computer screen.• Reset all - You can reset all the fields to their original values.• Restore defaults - You can reset the Trip computer screen to its default view.The values on the Trip computer screen will not be reset.• Mark position - You can save your current location as a waypoint. For moreinformation, see Saving a waypoint (Mark position) on page 14.■ Following a routeOn the Route guidance screen, you can follow the route that you have activatedon the Routes screen or navigate to the waypoint that you have activated usingthe Go to option of the Mark position function (available on several screens).The screen shows the following information: course, bearing, next waypoint,speed, and distance to the next waypoint.• The blue course arrow indicates the direction where you are heading. Thedirection is indicated by N (north), S (south), E (east), and W (west).The yellow bearing arrow indicates the direction where you should be headingto reach the next waypoint.To reach the next waypoint, adjust your direction so that the two arrows pointto the same direction.If the GPS receiver cannot receive the needed positioning information fromGPS satellites, the Next: and Dist. to next fields are empty, and a question markis shown in the middle of the screen.