I n s t a l l a t i o n82. Installation■ Installing the Reader Shell and downloading theapplicationsWhen taking Nokia Mobile RFID Kit into use, first install the Xpress-on™RFID Reader Shell to your Nokia 5140 phone.When the Xpress-on™ RFID Reader Shell is installed, the Cover browserapplication is automatically downloaded from the shell to the phone.You can then use the Cover browser application to download theShortcut and RecordData applications.Note: Before removing the phone cover, always switch off thepower and disconnect the charger and any other device. Avoidtouching electronic components while changing the covers.Always store and use the device with the covers attached.To install Reader Shell and download applications:1. Remove the phone cover, and install the upper and lower part of theXpress-on™ RFID Reader Shell as instructed in the user guide of yourNokia 5140 phone.2. Switch on the phone.The Cover browser application is automatically downloaded into theCollection submenu of the Applications menu in the phone.Downloading may take a few minutes.3. Press Start to start the Cover browser application.4. To download the Shortcut or the RecordData application from theshell to the phone, select Shortcut or RecordData and press Select.The selected application is downloaded into the Collection submenuin the phone. Downloading may take a few minutes.If you also wish to download the other application from the shell to thephone, start the Cover browser application in the Collection submenuand follow the instructions in step 4.Mobile_RFID_kit.book Page 8 Friday, May 14, 2004 6:02 PM