Norcent LT2740 User Manual

Contents

Norcent LT2740 User Manual Manual pdf 8 page image

7MENU, , , ,These buttons are used todisplay or adjust the variousfunctionalities.When the PIPis ON but no menus areavailable, use these , ,, to change the positionof the PIP.USE OF THE REMOTE CONTROLSLEEPWith this key you can set atime period after which theTV should switch itself tostandby. The counter runsfrom 30,60,90,120 minutes.The timer begins to countdown from the number ofminutes selected after thedisplay has disappeared.POWER:Press to turn on/off the TV.The TV is never completelypowered off unless it isphysically unplugged.0~9/100 Digit buttonsTo select a TV channel.TV/VIDEOSelect your input source: pressrepeatedly to select TV, AV1,AV2, S-VIDEO orCOMPONENT mode,according to where youconnected your externalsource.y AV1/AV2 for a VCRconnected to the AVconnectors of the TV.y S-VIDEO for a S-VideoVCR connected to the S-VIDEO connector of the TV.y Color contrast signal andHDTV input via Y, Pb, Pron the top of the DVD set.MTSPress this key to activateMultichannel TelevisionSound, Stereo or MonoVOLPress + or – to adjustthe volume.MUTETemporarily interrupt thesound or restore it.CHPress or tobrowse through theTV channels.PRE-CHTo display the previouslyselected TV channel.SWAPPress to swap the twoscreens when PIP orPOP is work (option)PIPON/OFFUsed to switch the PIPfunction ON or OFF.(option).DISPLAYPress this button toDisplay Channelnumber on the right-topcorner.PIP/POPPress this button todisplay PC input andother input on thescreen at same time.(option).SIZEDisplay the graphic in16:9 or 4:3 mode.PIPTV/VIDEOSelect the signal source:If you are in main pictureor HDTV mode, you canselect audio1, audio2, S-video, color contrast orTV signal. Otherwise, youcan only select computergraphics or HDTV.V-CHIPUse this button to definethe movies that this TV setcan receive.OPERATING INSTRUCTIONSCAPTIONPress this button to turnClosed Caption on.