BIS-6592LC LED Screen Control Hardware Platform supporting 1080PHD Display27latest technology. Upgrading (or flashing) the BIOS is not an easy attempt. To make sureupgrade succeed, please follow the instruction below:AFUDOS.EXE is the program for BIOS to modify and upgrade，need to be run in DOS mode.Use boot disk load DOS, run Amiflash.exe and write the newest file: XXXX.ROM into the FlashIC.Order Format:A:\ Afudos XXXX.rom /P /B /C /N /XIf you need to add other parameters, please add /? after the order format.Remarks:1. Upgrading BISO may cause your system crash, so please operate carefully.2. Please use the upgrading program in the CD-ROM provided by us3. Please do not power off or reboot the system when upgrading, otherwise, the BIOSmaybe be damaged.4. After BIOS flash, to load default optimum manually5. Please backup your BIOS before upgradingAMI BIOS DescriptionWhen the computer is power on, BIOS will conduct self-diagnosis to its hardware onmotherboard and configure hardware parameter, finally the operating system will take control.BIOS is the communication bridge between hardware and O/S. Correct configuration of BIOSis critical for maintaining system stability and its optimized performance.BIOS SettingsAfter finishing the self-diagnosis, following message will show on the screen:DEL->SETUP, pls press DEL，then system will enter BIOS setup interface automatically atferdoing the IDE detection:1. Power on or reboot the computer, self-detection information will show:2. When message shows as "Press to enter setup"，pls press , then enter intoBIOS SETUP Program.3. Use the “←↑→↓”to choose the option which your want to modify, press and thenthe sub-menu.will show.4. Use the “←↑→↓”and to modify the value; press”Enter” to modify BIOS optionsthat you choose
