Norco BIS-6622 II User Manual
                                    | |
Contents
| 
BIS-6622 Mini PC Based on Intel Atom E6XX Processor52.2Jumper SettingPlease refer to the following jumper setting guide before installing your hareware devicesinstallation.Remark: How to identify jumper and PIN1 of interface: Please observe the word mark of plugsocket, it will use “1” or bold line or triangular symbols; and please look at the back ofPCB,each interface weld spot has a squar point, which is PIN 1; and all the jumper PIN1 have awhite arrow on the side.2.2.1 LVDS Voltage Jumper Setting（J2）Before using the chosen LVDS, please make clear of its rated voltage, then choose the propervoltage for this chosen LVDS via J2 jumper setting.Pin Signal Name2-4 3.3V4-6 5V2.3 Interface Specification2.3.1 USB Ports（USB1, USB2, USB3）Motherboard provides 2 standard USB interface ( USB 1and USB2 on the front panel) and one4Pin USB（USB3）.USB1，2：Pin Signal Name1 VCC2 USB_D-3 USB_D+4 GND5 GND6 GND： |
Related manuals for Norco BIS-6622 II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine