Norcold 442 Installation And Operating Instructions Manual

Also see for 442: Parts list Parts list Repair guide

Contents

Norcold 442 Installation And Operating Instructions Manual Manual pdf 8 page image

INSTALLATION INSTRUCTIONSCertification and Code RequirementsThe refrigerators described herein are certified un-der the latest edition of ANSI Z21.19 Standards bythe American Gas Association (A.G.A.) for installa-tion in mobile home or recreational vehicle and ap-proval by the Canadian Gas Association (CGA).Installation must be made in accordance with thesestandards and with the installation instructions pro-vided in this manual for the Norcold factory warrantyto be in effect.Installation must conform with local codes, or in theabsence of local codes, with the following standardsas applicable:In the United States:a. National Fuel Gas Code, ANSI Z223.1.b. Manufactured Home Construction and SafetyStandard, Title 24 CFR, Part 23-80.c. Standard for Recreational Vehicles,ANSIA119.2, latest edition.When an external electrical energy is utilized, therefrigerator must be electrically grounded in accord-ance with local codes, or in the absence of localcodes, the National electrical Code, ANSI/NFPA 70.In Canada:a. Current CGA B149.1 and B149.2 installationcode for Propane Appliances and Equipment..b. Current CSA Z240.4.2 installation code for Pro-pane Appliances and Equipment in Recrea-tional Vehicles.c. Current CSA Z240.6.2/C22.2 No. 148 ElectricalRequirement for Recreational Vehicles.When installed, the appliance must be electricallygrounded in accordance with the current CanadianElectrical Code C22.2 Parts 1 and 2.Cut-Out DimensionsThe refrigerators certified for built installation andrequires cut-out dimensions as indicated in Table 2below.Combustion SealsCombustion seals (foam strips) are attached to theback surface of the refrigerator’s mounting flanges.These seals isolate the products of combustion fromthe vehicle’s living space.The seals must be con-tinuous between the wall and the mountingflanges to assure a complete combustion seal.When installing or removing the refrigerator, insurethat the seals are not missing or damaged.Lower Flange InstallationThe lower mounting flange and mounting screwsare located in a clear plastic bag positioned in thecoils at the rear of the refrigerator. After removing theplastic bag, slide the refrigerator partially into the en-closure and attach the lower mounting flange. Installthe lower mounting flange by maneuvering it underthe bottom control cover and secure with the screwsprovided. Refer to Figure 7.Do not omit installa-tion of the lower mounting flange. This flange ispart of the combustion seal.Securing the RefrigeratorSecure the refrigerator with screws through themounting flange holes at the front of the refrigeratorand the holes at floor level at the rear of the refrig-erator. Screw covers are provided to cover the frontmounting flange holes.TABLE 2REFRIGERATOR CUT-OUT OPENINGS (INCHES)Model462, 463482, 483452,453442,443Height52 7/859 7/843 1/430 7/8Width23 1/223 1/223 1/223 1/2Depth24242424Figure 78