Norcold N61 Series Installation Manual

Also see for N61 Series: Owner's manual Service manual Owner's manual

Contents

Norcold N61 Series Installation Manual Manual pdf 12 page image

Installation Manual 12Reverse the Door Swing-Nonmetal Doors (optional)This refrigerator has cabinet hinges that allow you to change the direction the door opensby moving the hinges on a diagonal to the opposite side.1. Remove the doors (See Art01726):- Remove the storage bins from the doors.Do not mix the upper and lower hinge pins because they are different.- Remove and save the upper hinge pin [63] from each door.- Pull the door latch and remove each door from the refrigerator.- Remove and save the lower hinge pin [64] from each hinge.2. Change the position of the cabinet hinges and the strike plate (See Art01728):- Remove and save the screws from the strike plate [65a].- Remove the two plastic hole caps that are near the strike plate.- Remove the L-shaped plastic covers that are opposite the hinges.- Remove and save the screws from the upper cabinet hinge[66a] of each door.- Put each of these hinges on the other side of the refrigeratoras the lower hinge [66b].- Attach each of these hinges with screws.- Remove and save the screws from the lower cabinet hinge[67a] of each door.- Put each of these hinges on the other side of the refrigeratoras the upper hinge [67b].- Attach each of these hinges with screws.- Put the L-shaped plastic covers over the holes that were usedby the hinges.66Art01726636467Art0172866a67a65b66a66b67a65a67b67b66bNOTICE