Installation Manual 11Automatic Mode Operation:1. Push the selector switch [07] to the AUTO position (SeeArt0188).. Push the temperature switch [14] to the desired temperaturesetting.- If the ON light [60] only comes on, it means that:- 10 volt AC power is available to the refrigerator.- The refrigerator is operating on AC electric power.- If the ON light and the GAS light [6] both come on, it meansthat:- 10 volt AC power is not available to the refrigerator.- The refrigerator is operating on propane gas.GAS Mode Operation:1. Push the selector switch [07] to the GAS position.. Push the temperature switch [14] to the desired temperaturesetting.- If the ON light and the GAS light [6] both come on, it meansthat the refrigerator is operating on propane gas.Do a test of the gas safety valve:1. Start up the refrigerator in gas mode operation.. Open the lower intake vent.. Remove one wire from the solenoid of the gas safety valve atthe rear of the refrigerator.4. Within 0 seconds, the flame should extinguish. This meansthat the gas safety valve is operating correctly.5. Put the wire back on the solenoid of the gas safety valve.6. Close the lower intake vent.Shut down:To shut down the refrigerator, push the selector switch to the OFFposition.Display CodesLight and StatusON light is on.GAS light is off.ON light is on.GAS light is on.MeaningThe refrigerator is operating onAC.The refrigerator is operating onpropane gas.