Norcold N62 Series Installation Manual

Also see for N62: Service manual Installation manual

Contents

Norcold N62 Series Installation Manual Manual pdf 12 page image

Installation Manual 12This refrigerator has cabinet hinges that allow you to change the direction the door opensby moving the hinges on a diagonal to the opposite side.1. Remove the doors (See Art01726):- Remove the storage bins from the doors.Do not mix the upper and lower hinge pins because they are different.- Remove and save the upper hinge pin [63] from each hinge.- Pull the door latch and remove each door from the refrigerator.- Remove and save the lower hinge pin [64] from each hinge.2. Change the position of the cabinet hinges and the strike plate (See Art01728):- Remove and save the screws from the strike plate [65a].- Remove the two plastic hole caps that are near the strike plate.- Remove the L-shaped plastic covers that are opposite the hinges.- Remove and save the screws from the upper cabinet hinge[66a] of each door.- Put each of these hinges on the other side of the refrigeratoras the lower hinge [66b].- Attach each of these hinges with screws.- Remove and save the screws from the lower cabinet hinge[67a] of each door.- Put each of these hinges on the other side of the refrigeratoras the upper hinge [67b].- Attach each of these hinges with screws.- Put the L-shaped plastic covers over the holes that were usedby the hinges.- Remove and save the screw [41] from the front box [68] (SeeArt01573).- Pull the front box away from the refrigerator and out from underthe controls [69].- Reverse the front box and put it on the opposite side of thecontrols.- Attach the front box to the refrigerator with the screw.- Put the strike plate on the opposite side of the refrigerator[65b].- Put the two round plastic caps into the holes that are near thestrike plate.66Art01726636467Reverse the Door Swing-Nonmetal Doors (optional)Art0172866a67a65b66a66b67a65a67b67b66bNOTICE