Norcold NX64 Installation Manual

Also see for NX64: Service manual Owner's manual

Contents

Installation Manual 134. Change the position of the cabinet hinges:- Using a straight screwdriver, remove and save the lower (straight) hinge pins [64]from each both of the lower cabinet hinges (See Art02389).- Remove the two L-shaped plastic covers [273] and the black plastic cover [305]that are opposite the cabinet hinges (See Art02390).- Remove and save the screws from the upper cabinet hinge [66a] of each door.- Put each of these hinges on the other side of the refrigerator as the lower hinge[66b].- Attach each of these hinges with screws.- Remove and save the screws from the lower cabinet hinge [67a] of each door.- Put each of these hinges on the other side of the refrigerator as the upper hinge[67b].- Attach each of these hinges with screws.- Put the two L-shaped plastic covers and the black plastic cover over theholes that were used by the hinges.5. Change the position of the door handles and door hinges:- Remove and save the hinge bushings [74] from each door hinge (SeeArt02391.- Remove the screws and the flat door hinge [274a] from each door (on thetop of the upper door and the bottom of the lower door).- Turn the flat door hinge over and use the screws to attach it to the oppositeside [274b] of each door (on the top of the upper door and the bottom of thelower door).- Remove and save the screws and the shaped door hinge [275] from eachdoor (on the bottom of the upper door and the top of the lower door).When you remove each door handle [70] from the door, thelatch and the spring will be loose. Be careful not to lose thelatch or the spring.- Remove and save the two screws that attach each door handle [70a] to thedoor.- Pull each door handle away from the door.Art0238964Art0239066a67b67a66b27366a67a67b66b273305NOTICE