© 2006 Nordic ID OyConfiguration manual for EV15 scanner July 200616Code 128 / EAN 128 - reading tolerance - high (*)\60\01\53\2F\00\00\00• sets the tolerance level for reading hard to readbarcodes9.7 Reading toleranceCode 128 / EAN 128 - reading tolerance - medium\60\01\53\2F\00\02\40• Most permissive (reads codes of variable quality)Code 128 / EAN 128 - reading tolerance - low\60\01\53\2F\00\05\20• Least permissive (only reads high quality codes that meetofficial Code 128 standards)9.8 ISBT 128• International Society of Blood Transfusion• Activating ISBT 128 deactivates Code 128 / EAN 128 (toavoid confusion with Code 128 / EAN 128)IMPORTANT:- codes are not concatenated by default (defaulttransmission setting is “single codes only”)- you must select one of the “concatenated codes”transmission options to send concatenated codes(see “transmit” section)Code 128 / EAN 128 - ISBT 128 - not active (*)\60\01\53\21\00\00\00Code 128 / EAN 128 - ISBT 128 - active\60\01\53\21\00\03\23\01\4A\40\01\53\22\00\00\009.8.1 TransmitCode 128 / EAN 128 - ISBT 128 - transmit -single codes only (*)\60\01\53\3A\00\00\00Code 128 / EAN 128 - ISBT 128 - transmit -concatenated codes only\60\01\53\3A\00\02\40• Codes are always transmitted as single codes (noconcatenation)• The product will only send one code even if it can“see” both codes of a code pair• Only transmits concatenated codes, does not transmitsingle codes• Default concatenation setting is “authorized ISBT 128code pairs only” (see “concatenate” section)