Nordic ID EXA51 User Manual
Also see for EXA51: Quick guideQuick guideUser guide
                       | |
Contents
| 
2017-04-26Nordic ID EXA51 User GuideVersion 1.31.9.4. CONFIGURING HID MODE VIA APPLICATION1. Install Nordic ID RFID Demo application (see section 2.1)2. Connect your device3. Turn on HID mode, RFID and/or barcode mode in reader settings4. Close application and make sure Bluetooth connection is closed5. Reboot your EXA51 device by pressing the power button for 2...3 seconds.1.10. USING THE READER1.10.1. KEYS AND BUTTONSThe Nordic ID EXA51 includes two capacitive buttons and one physical button for user interactions.Location of the keys can be seen in the Picture 12.Picture 12 Location of capacitive keys1.10.1.1. TRIGGER BUTTONThe trigger button is located on the pistol grip and it can be used to start/stop UHF RFID/barcodescanning. Depending on the application in use, the trigger button starts/stops UHF RFID or barcodereading. By default, the first press of the button starts the reading and the second press of the buttonstops it. There is no need to keep the button pressed at all times.1.10.1.2. POWER KEYPower key turns reader On/Off. The power key needs to be pressed for about 2…3 seconds before ittriggers, this ensures that accidental presses are avoided.NOTE! Button usage depends on the application in use |
Related manuals for Nordic ID EXA51
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine