NordicTrack 30510.0 User Manual

Also see for 130 Elliptical: User manual Manuel de l'utilisateur User manual

Contents

811. Hold the Left Front Handlebar Cover (18) and the LeftRear Handlebar Cover (19) around the Left Upper BodyArm (11). Attach the Handlebar Covers with three M4 x32mm Round Head Screws (105).Attach the Right Front Handlebar Cover (20) and theRight Rear Handlebar Cover (21) in the same way.10. Insert the Pivot Axle (74) into the Upright (3) and centerit. Apply a generous amount of the included grease tothe Pivot Axle.Orient the Left Upper Body Arm (11) as shown, andslide it onto the left end of the Pivot Axle (74). Slide theRight Upper Body Arm (12) onto the right end of thePivot Axle.Tighten an M8 x 23mm Button Screw (84) with an M8Washer (88) and a Wave Washer (111) into each end ofthe Pivot Axle (74). Make sure that the Wave Washersare on the ends of the Pivot Axle.9. Identify the Left Handlebar (8) and the Left Upper BodyArm (11), which are marked with stickers.Orient the Left Handlebar (8) and the Left Upper BodyArm (11) as shown, and insert the Left Handlebar into theLeft Upper Body Arm. Attach the Left Handlebar with twoM8 x 43mm Button Bolts (78) and two M8 Jamnuts (79).Make sure that the Jamnuts are in the hexagonalholes in the Left Upper Body Arm.Attach the Right Handlebar (9) to the Right Upper BodyArm (12) in the same way.911891288841118874384 11112117878797920211051219Grease11101811