NordicTrack 910 Elliptical User Manual

Contents

5ASSEMBLYAssembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove thepacking materials. Do not dispose of the packing materials until assembly is completed. In addition to the twoincluded allen wrenches, assembly requires a phillips screwdriver , an adjustablewrench , a rubber mallet , and pliers .As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST onpage 22. The second number refers to the quantity used in assembly. Note: Some small parts may have beenpre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.1. Identify the Rear Stabilizer (94), which has two LevelingFeet (99) threaded into it. Turn the Rear Stabilizer sothe Leveling Feet are closest to the rear of the Frame(1) as shown. Attach the Rear Stabilizer to the Framewith the four M10 x 56mm Button Screws (60) and fourM10 Split Washers (22).22 16060 2294991M10 Nylon Locknut (26)–5M8 x 19mm Screw (30)–2M10 x 85mm Bolt (25)–1M8 SplitWasher (58)–2 M8 Washer (33)–2 M10 SplitWasher (22)–8 M10 Washer (63)–2M10 x 43mm Button Screw (97)–4M10 x 56mm Button Screw (60)–4 M10 x 33mm Carriage Bolt (61)–2