9HOW TO PLUG IN THE POWER ADAPTERIMPORTANT: If the elliptical has been exposed tocold temperatures, allow it to warm to room tem-perature before you plug in the power adapter. Ifyou do not do this, you may damage the consoledisplays or other electronic components.Plug the power adapterinto the receptacle onthe frame of the ellipti-cal. Then, plug thepower adapter into anappropriate outlet thatis properly installedin accordance withall local codes andordinances.HOW TO LEVEL THE ELLIPTICALIf the ellipticalrocks slightly onyour floor dur-ing use, turnone or both ofthe leveling feetbeneath the rearstabilizer until therocking motion iseliminated.HOW TO MOVE THE ELLIPTICALDue to the size and weight of the elliptical, movingit requires two persons.First, loosen the uprightknob and pull it, pullthe upright backwarduntil the latch locks intoplace, and then releasethe upright knob.Next, pull the uprightforward slightly, liftthe latch, and thenlower the upright to thefolded position. Holdthe upright in one ofthe indicated loca-tions while you lowerthe upright; do nothold the upper bodyarms.Then, lift the handle on the front stabilizer until theelliptical will roll on the wheels. Carefully move theelliptical to the desired location, and then lower it to thefloor.When you are finished moving the elliptical, lift theupright to the upright position and tighten the uprightknob.HOW TO USE THE ELLIPTICALPower AdapterLevelingFeetPull knobPullbackwardPullforwardHold tolowerLift latchLifthandle