NordicTrack Elliptical E7.5 User Manual

Also see for Elliptical E7.5: User manual User manual User manual User manual

Contents

72. Orient the Front Stabilizer (3) as shown.While a second person lifts the front of theFrame (1), attach the Front Stabilizer (3) withtwo M10 x 120mm Screws (100).2311003. Identify and orient the Upright (5) and the TopCover (23) as shown.Slide the Top Cover (23) upward onto theUpright (5).Have a second person hold the Upright (5) andthe Top Cover (23) near the Frame (1).Locate the wire tie in the Upright (5). Tie thelower end of the wire tie to the Upright Wire (60).Next, pull the upper end of the wire tie until theUpright Wire is routed through the Upright.Tip: To prevent the Upright Wire (60) fromfalling into the Upright (5), secure the UprightWire with the wire tie.Tip: Avoid pinching the Upright Wire (60).Slide the Upright (5) onto the Frame (1).Attach the Upright (5) with eight M8 x 16mmScrews (102) and eight M8 Split Washers (131)(only four of each are shown); do not tightenthe Screws yet.Do not press the Top Cover (23) into placeyet.35Wire TieWire Tie23601021021021311311311Avoid pinching theUpright Wire (60)