NordicTrack Mtn740 Stepper User Manual

Also see for Mtn740 Stepper: User manual

Contents

NordicTrack Mtn740 Stepper User Manual Manual pdf 5 page image

51. While another person lifts and holds the indicated endof the Frame (1), attach the Front Stabilizer (95) tothe Frame with two M10 x 75mm Button Screws (92).Make sure that the Front Stabilizer is turned sothe Wheels (67) are not touching the floor.9219567671ASSEMBLYAssembly requires two persons. Place all parts of the stepper in a cleared area and remove the packingmaterials. Do not dispose of the packing materials until assembly is completed. In addition to the included hexkeys, assembly requires an adjustable wrench and a rubber mallet .As you assemble the stepper, use the drawings below to identify small parts. The number in parentheses beloweach drawing is the key number of the part, from the PART LIST near the end of this manual. The number follow-ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem-bled. If a part is not in the hardware kit, check to see if it has been preassembled.M10 SplitWasher (30)–6M10 NylonLocknut (27)–4M8 NylonLocknut (28)–4M8 x 35mmButton Bolt (24)–4M8 SplitWasher (54)–4M10 x 82mm ButtonBolt (26)–4M10 x 91mm ButtonScrew (63)–2M10 x 75mm ButtonScrew (92)–2ConsoleScrew (57)–4M10 x 48mm ButtonScrew (99)–4