NordicTrack NTEVEL89816.0 User Manual

Also see for C7.5: User manual User manual

Contents

NordicTrack NTEVEL89816.0 User Manual Manual pdf 7 page image

7• Assembly requires two persons.• Place all parts in a cleared area and remove thepacking materials. Do not dispose of the packingmaterials until you finish all assembly steps.• Left parts are marked “L” or “Left” and right partsare marked “R” or “Right.”• To identify small parts, see page 6.• In addition to the included tool(s), assemblyrequires the following tools:one Phillips screwdriverone rubber malletAssembly may be easier if you have your own setof wrenches. To avoid damaging parts, do not usepower tools.ASSEMBLY12. With the help of a second person, place some ofthe packing materials (not shown) under the rearof the Frame (1). Have the second person holdthe Frame to prevent it from tipping while youcomplete this step.Attach the Rear Stabilizer (2) to the Frame (1)with two M10 x 122mm Screws (104) and twoM10 Split Washers (105).Then, remove the packing materials from underthe rear of the Frame (1).212104 1051. Go to www.iconsupport.eu on your computerand register your product.• activates your warranty• saves you time if you ever need to contactCustomer Service• allows us to notify you of upgrades and offersNote: If you do not have internet access, callCustomer Service (see the front cover of thismanual) and register your product.