Nordmann Engineering AT4 D SPA Display Installation And Operation Manual
Also see for AT4 D SPA Display: Operating instructionsInstallation and operating instructionsService manual
                                | |
Contents
| 
94 Installation4.1 Unpacking and checking the scope of deliveryUnpacking the unitOpen the packing and check the delivery for completeness. Please contact your Nordmann represent-ative in case something is lacking, they will be glad to send you the missing part without delay. Thestandard delivery includes:– Nordmann AT4 D SPA Display flush-mounted– Nordmann AT4 D SPA Display control PCB– Flush-mounted housing with pre-mounted display mounting supports, fastening claws and3 magnets– Plastic bag containing mounting material– Nordmann AT4 D SPA Display surface-mounted– Nordmann AT4 D SPA Display control PCB– Surface-mounted housing– Plastic bag containing mounting material– Decoration cover with pre-mounted centring frame and sealing (if ordered)Please check the equipment for damage. Please report any damage to your Nordmann representativeand to the carriers, as required.PackagingThe original packaging of the Nordmann AT4 D SPA Display was designed for optimum safety duringtransportation. Please preserve the original packing material in case you once have to return the unitfor some reason.In case you wish to dispose of the packaging, observe the local regulations on waste disposal. Neverdispose of the packaging to the environment.4.2 Storing the unitIf the external steam bath control must be stored, store it in a protected area (best in the original pack-aging) meeting the following requirements:– room temperature: 1 ... 40 °C– room humidity: 10 ... 80 %rh (non condensing) |
Related manuals for Nordmann Engineering AT4 D SPA Display
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine