Nordmende CTG50WH Operating And Installation Instructions

Contents

Nordmende CTG50WH Operating And Installation Instructions Manual pdf 9 page image

3. Part : INSTALLATION AND PREPARATIONS FOR USE8•.•.•80°C.•.3.3 Adjustment of feet.3.4 Gas connectionPay attention not to place it near the refrigerator, there must be noflammable or inflammable materials such as curtain, waterproof cloth, etc.that will begin to burn quicklyIt is required that there must be least a 2cm blank space around the oven forair circulationThe furniture close to oven must be manufactured resistant to temperaturesup toIf the kitchen furniture are higher than the hob plate of the oven, it must beat least 10cm away from the oven's side.The minimum heights from the oven's pan and wall cupboards and cookerhoods with fan over the oven, are shown as above. Thus, the cooker hood mustbe at minimum 65cm height from the cooker pan. If there is no cooker hood,this height must not be less than 70cm.Your oven stands on 4 adjustable feet. When the oven is placed where it will beused, check if the oven is balanced. If it is not balanced, you can make theadjustment by turning the feet clockwise if required. It is possible to raise theappliance maximum 30mm by the feet. If the feet are adjusted appropriately, itis required not to move the appliance by dragging, it should be moved by liftingit upThe connection of the appliance should be performed in accordance with localand international standards and regulations applicable. You can find theinformation related to appropriate gas types and appropriate gas injectors ontechnical data table. If the pressure of used gas is different than these valuesstated of the or not stable in your area, it may be required to assemble anavailable pressure regulator on the gas inlet. It is certainly required to contactto the authorized service to make these adjusments.The points that must be checked during flexible hose assemblyIf the gas connection is made by a flexible hose that is fixed on the gas inlet ofappliance, it must be fixed by a pipe collar as well. Connect your appliance witha short and durable hose that is as close as possible to the gas source. Thehose's permitted maximum lenght is 1.5m. The hose that brings gas to theappliance must be changed once a year for your security.The hose must be kept clear from areas that may heat up to temperatures in0excess of 50 C. The hose must not be ruptured, bent or folded. The hose mustbe kept clear of sharp corners, moving things, and should not be defective.Before assembly, it must be checked whether there is any production defect.