EN - 5 -• Fix the accessories in the fridge during transportation to prevent damageto accessories.Installing and operating your fridgeBefore starting to use your fridge, you should pay attention to the following points:• Operating voltage for your fridge is 220-240 V at 50Hz.• W e do not take the responsibility of the damages that occur due to ungroundedusage.• Place your fridge in a place that it would not be exposed to direct sunlight.• Your appliance should be at least 50 cm away from stoves, Gasovens and heater cores, and should be at least 5 cm away fromelectrical ovens.• Your fridge should never be used outdoors or left under the rain.• When your fridge is placed next to a deep freezer, there should be atleast 2 cm between them to prevent humidity on the outer surface.• Do not place anything on your fridge, and install your fridge in asuitable place so that at least 15 cm is available on the upper side.• The adjustable front legs should stabilized in an appropriate height to allow yourfridge operate in a stable and proper way. You can adjust the legs by turning themclockwise (or in the opposite direction). This should be done before placing food inthe fridge.• Before using your fridge, wipe all parts with warm water added witha tea spoonful of sodium bicarbonate, and then rinse with cleanwater and dry. Place all parts after cleaning.• Install the distance adjustment plastic (the part with black vanes atthe rear) by turning it 90° as shown in the figure to prevent thecondenser from touching the wall.Before Using your Fridge• When it is operated for the first time or after transportation, keepyour fridge in the upright position for 3 hours and plug it on toallow efficient operation. Otherwise, you may damage thecompressor.• Your fridge may have a smell when it is operated for the first time; the smell will fadeaway when your fridge starts to cool.