5. Child lock FunctionTo activate the Child Lock Function, press " " and " " simultaneously for three seconds. Therewill be a long beeping sound and the " " will become illuminated.To deactivate the Child Lock Function, press " " and " " simultaneously for three seconds. There willbe a long beeping sound and the " " will no longer be illuminated and a sound will indicate that theNote:If you wish to stop cooking while the appliance is in operation, quickly press the pause button. This willshut down the appliance immediately.OPERATION INSTRUCTIONS1. Clock SettingsAfter connecting the unit to the power, the symbol " 0:00 " will be visible on the LED display.1> Press " " to make the hour figure flash.2> Rotate Knob 2 to adjust the hour setting (The time should be between 0 and 23).3> Press " " to make make the minute figure flash.4> Rotate Knob 2 to adjust the minute setting (The time should be between 0 and 59).5> Press " " to finish adjusting the clock. " : " will flash and the time will be displayed. Note: Theclock is a 24 hour clock. After powering up, if the time is not set, the clock will show "0:00".2. Function Settings1> Rotate Knob 1 to choose the cooking function you require. The related symbol will becomeilluminated.2> Rotate Knob 2 to adjust the temperature.3> Press " " to start cooking.4> If step two is ignored, press " " to start cooking and the default temperature will appear onthe LED Display.Note:• You can adjust the cooking time or temperature of the programme by using the rotating knobs.• Rotate Knob 1 to adjust the cooking time. If the programmed cooking time is thirty minutes orshorter, each turn of the knob will equate to 1 minute. If the cooking time is between thirty minutes andnine hours, each turn of the knob will equate to five minutes. Press " " to confirm adjustments.• Rotate Knob 2 to adjust the cooking temperature to begin cooking. Each turn of the Knob 2 willadjust the temperature by 5℃, except for the radiant grilling function, where the adjustment is 30℃.Press " " to confirm adjustments.5> Press " " to start cooking. If it is not pressed within three seconds, the oven will revert back to theprevious setting, in order to continue cooking.3. Lamp Settings1> Rotate Knob 1 to select the relevant function, then the corresponding icon will turn on.2> Press " " to start. " 0:00 " and the lamp icon will light up. " : " will flash.4. Time Inquiry FunctionIf the oven is in use, you can adjust the clock to display the following:1> While the appliance is working, press " " to change the display to the current time. If thereminder function is set, press " " to see the time of the reminder.2> When using the reminder function, press " " to change the display to the current time.3> When the time is displayed, if a reminder has been set, press " " to show the time of thereminder.7child-lock has been released.