380 Sieve 3P/N 7156868A 2010 Nordson Corporation 380 SieveLiability and WarrantyThe sieving system is intended to be used only to sieve suitable material.Any other use is considered to be unintended and can result in personalinjury or property damage.Nordson will not be liable for any damage or consequential damageresulting from unintended use, failure to observe the manual, interventionsby the purchaser, structural modifications, force, overheating, overload,exposure to moisture, etc.Nordson will not be liable for personal injury or property damage caused byunintended and/or improper handling of the equipment.Quality ControlYour equipment has been carefully inspected, during and after production.Upon unpacking, please check the equipment carefully for transportdamage.Technical DataStandard Electrical connection: 230 V~ 50 or 60 Hz, Pmax < 50W Total air consumption (compressed air):< 0.5 MPa network pressure, < 1 Nm3/hPermitted: Residual oil 0.13 mg/Nm3 Residual water 1.3 g/Nm3 Compressed air connection: Pnetwork = 0.6 MPa The capacity varies according to the powder quality, output quantity,mesh size, etc. (The average capacity of a 500 micrometer sieve, ø 400mm, is 100 kg/h)With Option Ultrasonic Sieve Generator: GM 2070−SB HF output: 60 W HF frequency: 20 kHz homogenous ultrasound wave Pmax < 50W

General Information

Safety Instructions

Liability and Warranty

Commissioning

Preparatory Work

Components

Description of Functions

Aspiration

Changing the Sieve

Changing Paint and Cleaning

Maintenance

Wearing and Spare Parts

Nordson 380 Manual