Nordson Encore LT Operator Card
Also see for Encore LT: Product manualQuick start guideInstruction manualCustomer product manualProduct manual
    | |
1Nordson CorporationEncore LT Manual Powder Spray SystemsOPERATOR CARD P/N 1604859-01WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructionsin this document and all other related documentation.Controller InterfaceTrigger LEDSmart Flow LEDFlow Air Output (Classic)Flow Air % Output (Smart Flow)Atomizing Air Output (Classic)Total Flow Output (Smart Flow)Select Charge Mode SettingsKV/μA Setting/OutputSTD/AFCMode ToggleEnable/DisablePressing the Enable/Disable button for threeseconds puts the controller to sleep (low powermode). The displays and LEDs turn off. To wake thecontroller press the button again.The system goes to sleep automatically if no activityis detected for approximately 15 minutes. Pulling thegun trigger, pressing the purge switch, or pressing abutton on the controller interface wakes the controller.When the gun is triggered the Trigger LEDis lit, and actual kV/μA outputs are displayed. Whennot triggered the kV/μA setpoint is displayed. The twoair flow displays always show the setpoints.The Smart Flow LED lights when thecontroller is configured for Smart Flow mode. Refer toPowder Flow Setting for an explanation.Controller ConfigurationDuring power up or wake up from disable, press andhold the + and − buttons on the kV/uA panel for 1second. When the kV/μA panel displays F − 1 forfunction 1 the controller is in configuration mode.To change functions, press the Plus or Minus buttonson the kV/μA panel. To change function values pressthe Plus or Minus buttons on the Flow Air panel. Tosave your settings and exit Configuration Mode,press the Enable/Disable button.Function No. Name Settings Default1 Gun Type 0 = Encore 02 Fluidizing 0 = Hopper, 1 = Box, 3 = Disable 03 Electrostatic Control 0 = Custom, 1 = Classic, 2 = PE 04 Powder Flow Control 0 = Smart, 1 = Classic 05 Cable Length 0 = 6 meters, 1 = 12 meters, 2 = 18 meters 06 Vibratory Box Delay on, 0−90 seconds 30 |
Related manuals for Nordson Encore LT
Nordson WM-1 Operator Card
Nordson Colormax Operator Card
Nordson Encore LT Product Manual
Nordson Encore LT Instruction Manual
Nordson Encore LT Quick Start Manual
Nordson Encore LT Customer Product Manual
Nordson Encore Product Manual
Nordson Encore XL Powder Manual
Nordson Encore PE Product Manual
Nordson Encore Instruction Sheet
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine