Nordson PowderPilot HD Manual

Nordson PowderPilot HD Manual Manual pdf 12 page image

Powder Pilot™ HDP/No.7192721_02Page | 12Section 2DescriptionProduct InformationThe Nordson PowderPilot™ is an easy−to−use control system, withsoftware and hardware specifically designed for automated powdercoating systems.The spray control system is based around a Siemens S7−315 PLCunit providing plant control, and a Siemens PC−677 providingHuman-Machine-Interface.The spray control system is based around a Siemens S7-300 Soft-PLC unit providing plant control via a Siemens S1200 PLC, and aSiemens PC-277D panel PC providing Human-Machine InterfaceA touch sensitive screen is used for all interactions between theoperator and the machine. In addition the control panel is fitted withan Emergency Stop push−button, a Reset push−button and a klaxonunit.The 15” touch sensitive screen is used for all interactions betweenthe operator and the machine In addition, the control panel is fittedwith an Emergency Stop push-button, a Reset push-button and alight stack with klaxon unit.This manual describes in detail, the operation required to control theplant via the operator interface.This manual describes the operation required to control the plant viathe operator interface as well as operating the SpectrumHD GenIIfeed centre for fast and easy colour change.NOTE: The Nordson PowderPilot™ is a bespoke control system andis always designed according to customer requirements.Technical support is available from your local NordsonRepresentative.