Nordson Seal Sentry 10 Series Customer Product Manual

Contents

Nordson Seal Sentry 10 Series Customer Product Manual Manual pdf 6 page image

65-SVC10-MA-01 Issued 2/104SpecificationsInput: 85−260 VAC, 3A, 1 phase, 50/60 HzRelay contact output rating maximum: 4A, 230 VACMinimum bead size: 1.5 mm @ 20 m/min (0.06 in. @ 66 ft/min)Maximum line speed: 300 m/min with a 60 mm bead (1,000 ft/min, 2.4 in. bead)Bead sensor: InfraredFault output: Normally open or Normally closed relay contactField of view: 12 to 18 mm (0.47 to 0.65 in.)10 to 50 mm (0.8 to 2 in.) from substrateNOTE: Minimum bead size and maximum line speeds are dependent on the quantity of heat present and will varybased on the application temperature of the adhesive. Published specifications are with an application temperatureof 175 °C (350 °F) and a minimum bead width of 3 mm (0.12 in.).DimensionsControl: 205 x 205 x 85 mm (8 x 8 x 3.4 in.)Sensor: 25 x 27 x 65 mm (1 x 1.06 x 2.6 in.)Sensor mounting/spacing: 40 mm (1.57 in.)Ratings and Certification Control enclosure: IP52 Sensor enclosure: IP65 Certification: CE5739279A205 mm(8 in.)205 mm(8 in.)165 mm(6.5 in.)165 mm(6.5 in.)40 mm;M6Bead SensorControl Unit18 mm; (0.71 in.)(1.6 in.)Size specification of equipment