Noritz N-0751M Owner's Manual

Also see for N-0751M: Field manual Owner's guide Installation manual Installation manual Instructional manual

Contents

23Remote ControllerThe water temperature changesafter a power failure or when thepower is disconnected.The light on the power buttondoes not come on.• Has there been a power failure?• Is the power connected properly?• The temperature setting and the flow meter alarm settingmay both need to be reset after a power outage.The fan can be heard afteroperation is stopped.A motor can be heard when turningthe unit ON or OFF, when openingor closing a fixture, or after the unithas been running for a while.• These noises indicate the proper operation of deviceswhich are designed to let the unit reignite more quickly,and ensure the water temperature is stable.The Heater stops burning duringoperation.• Are the gas and water supply valves fully open?• Is the water supply cut off?• Is the hot water fixture sufficiently open?• Is the gas being cut off by the gas meter?(Can other gas devices such as stoves be used?)• (For LP) Is there enough gas in the tank?(Can other gas devices such as stoves be used?)• This is normal. The white smoke is actually steam.White smoke comes out of theexhaust vent on a cold day.OtherSoundsThe plastic on the surface or buttonsof the remote controller has torn,peeled, or air bubbles inside.• The surface of the remote controller is affixed with aprotective sheet (to prevent surface scratching, etc.) attime of shipment. This sheet can be removed or left as itis. When leaving the protective sheet on, areas frequentlytouched may tear or peel. However, the remote controllerwill not malfunction from water entering such torn orpeeled areas. To restore the appearance of the remotecontroller surface, simply remove the protective sheet.The fan can be heard when it isvery cold outside.• The fan may run to prevent freezing.(Continued)

/ 26

Related manuals for Noritz N-0751M