Noritz N-0931M Installation Manual

Also see for N-0931M: Field manual Instructional manual Owner's guide Installation manual

Contents

24Connecting Quick Connect CordThe wire coloring on the Quick Connect Cord willnot be the same as the wire coloring of theconnection plug inside the unit.* The remote controller can be connected to eitherunit A or B.CautionFor Quick Connect Multi System Installationuse a Quick Connect Cord (sold separately).Quick ConnectCord"Quick Connect Cord" tagA B1.Red2.Black3.White4.Green5.Blue6.Blue1.Red2.Black3.White4.Green5.Blue6.Blue1.Red2.Black3.White4.Green5.Blue6.Blue1.White2.Green3.Red4.Black5.Blue6.BlueConnecting the Quick Connect Cord to the twounits.1. Turn off the power.2. Remove the front cover of the heater (4 screws).3. Pass the Quick Connect Cord through the wiringthroughway and into the unit.4. Plug the connector on the Quick Connect Cord tothe receptacle inside the unit.5. Attach the ground wire of the Quick ConnectCord to the terminal block fixing plate.(If the ground wire is not attached, electricalnoise may cause problems).6. Secure the Quick Connect Cord with a clamp.7. Replace the front cover. Wiring ThroughwayCoupling CordClampGround wireConnectorConnector