Noritz ecoTOUGH NRC661-DV Owner's Manual

Also see for NRC661-DV: Owner's guide Installation manual Service manual Instructional manual Installation manual

Noritz ecoTOUGH NRC661-DV Owner's Manual Manual pdf 16 page image

16How to Use (Using the optional remote controller)Flow Meter AlarmPlug the bath drain.(Starting with the power off)Press the PowerOn/Off Button.Set temperature.(Always check the temperaturesetting before use. )Adjust flow meter alarm setting.Turn on hot water.Turn off the hotwater when thealarm sounds.Check the indicator lights.Water temperaturePrevious set temperature(example:110°F)OnThe temperature will bedisplayed on the remotecontrol thermostat.When the displaysetting is in Celsius.When the displaysetting is in Fahrenheit.On OnPrevious set temperature(example:40°C)HotColdCheck the indicator lights.Water temperaturePress the flow meter alarm set button (the setting willflash on the display) and adjust with the setting buttons.IncreaseDecreaseChoose the flow meter alarm setting from the following options:10 - 60 gallon (40 - 240L) (In 5 gallon (20L) intervals), 70 gallon (260L),80 gallon (300L), 90 gallon (340L), 100 gallon (380L) , 990 gallon.Note: The alarm will not sound if it is set for 990 gallon.Flow meter settingwill be flashing(ex. 45 gallon)* The level can only be adjustedwhile the indicator is flashing.* After ten seconds, the remotewill again display the temperature.Flow meter settingwill be flashing(ex. 180L)The a alarm will soundwhen the set level has beenreached. Stop the water.Note: The alarm will not soundif it is set for 990 gallon.OnOffOnOffPreparationTo set the flow meter alarm: