Use method 1 or 2 below:1. Press Feature *6 - Press 1, 2, 3, 4 on keypad to hear the different ring types.2. While the telephone is ringing, repeatedly press the appropriate end of the volume bar (locatedbelow the keypad) to adjust the volume.Press OK to store the ring.Adjusting the handset or telephone speaker volumePress the appropriate end of the volume bar (located below the keypad) to adjust the volume whenusing the handset or speaker.Answering callsAnswering calls using the handsetWhen the telephone rings or the indicator flashes beside an intercom or line key:Lift the handset or press the key beside the flashing indicator before lifting the handset.Answering calls using handsfreeWhen the telephone rings or the Indicator flashes beside an intercom or line key press Handsfree.Making callsDepending on the dialling mode programmed on your telephone, you may have to lift your handsetbefore making a call.External calls using numbered line keys1. If you do not have an external Prime line, press a line key.2. Dial your call.External calls using intercom key1. Lift handset.2. If the indicator beside an intercom key is lit, enter a line pool access code.ORPress an intercom key which is not lit, then enter a line pool access code.3. When you hear external dial tone, dial your call.Internal calls using intercom keys1. If you do not have an internal prime line, press Intercom.2. Dial your call.Note: Line pool access codes and extension numbers are supplied by the System Coordinator.Making calls using Handsfree