Nortel 10 Safety Instruction

Also see for BayStack 10: Release note Installation and reference guide Installation instructions

SAFETY INSTRUCTIONfor BayStack 10 Power Supply UnitModels RPS-800-1 XX and RPS-800-2 XX1. The power supply unit can be operated in an ambient temperaturefrom 5°C up to 40°C max.2. The power supply unit is an equipment for building-in. All sides ofthe enclosure have been found as operator accessible area.However, all modification and replacement of compartments(includingthe battery, UPS and SPS modules) shall be performed by trainedservice personnel.3. The power supply unit has three configurations with differentelectrical ratings as stated below:Without UPS modules, Input: AC 100-240 V/12-6 A, 47-63 HzWith UPS module GES142L11yyyy installed, Input: AC 100/120 V, 12 A,60 Hz.With UPS module GES142L22yyyy installed, Input: AC 230 V, 7 A, 50Hz.4. When the unit has UPS modules installed, the output ratings of thefour AC outlets are defined as:Maximum AC O/P: 800 W/1400 VAMaximum DC O/P: according to each provided SPS moduleAC and DC combined O/P shall not exceed 800 W/1400 VA5. The power supply unit should be installed in the end system whichis located in a restricted access area2 1 2 3 0 5 - A* *70

/ 1

Related manuals for Nortel BayStack 10