Chapter 3 Using the console interface 147Using the BayStack 420 10/100/1000 SwitchConsole/Comm Port Configuration screenThe Console/Comm Port Configuration screen (Figure 68) allows you toconfigure and modify the console/comm port parameters and security features of astandalone switch or any participating switch in a stack configuration.To open the Console/Comm Port Configuration screen:Display configurationcomplete?This field allows you to determine whether the configuration information receivedfrom NVRAM/DRAM (depending on what is selected in the Display MessagesFrom field) is complete. Use the spacebar to toggle between the options.Default NoRange No, YesClear Messages From This field allows you to clear the information messages from DRAM, NVRAM orboth. If you clear DRAM messages, existing NVRAM messages are copied intoDRAM. After a system reset, all existing NVRAM messages are copied toDRAM. Use the spacebar to toggle between the options.Default NoneRange None, NVRAM, DRAM + NVRAMChoose Console/Comm Port Configuration (or press o) from the main menu.Table 32 System Log screen fields (continued)Field Description