42 Using the Audio menu2 If you have permission, and want to edit you audio profile, pressOk or press the send key.A list of available profiles appears.3 Select the profile you want.A check mark appears beside the selection.4 Press Ok or press the send key, to save the setting.The new profile is saved and you return to the main menu.—End—Changing the default volumeFollow this procedure to change the default volume of the handset, theheadset, or the handsfree speaker.Step Action1 From the main menu, select and open Audio.The Audio menu opens.2 Navigate through the menu and select Default Volumes.A list of transducers appears.3 Select the transducer to change.4 Press Ok, or press the send key.The Default Volumes menu opens.5 Perform one of these actions:• Use the right navigation key and scroll to increase the volume.• Use the left navigation key and scroll to decrease the volume.6 Press Apply to confirm the action.The selected volume is applied the next time that transducer is used.—End—Resetting a default volumeFollow this procedure to reset the default volume of the handset, theheadset, or the handsfree speaker.Carrier VoIPNortel IP Phone 1120E User GuideNN10300-022 01.02 Standard(I)SN09U 20 October 2006Copyright © 2006, Nortel Networks Nortel Networks Confidential.
