Connecting the components33mounting screws, and then tighten the top screws. See Figure 7 onpage 32.Method B: Attach the 15-cm (6-inch) CAT5e cable, position the standover the mounting rivets, and slide the phone down the wall so thatthe rivets fit into the slots on the stand, indicated in Figure 7 onpage 32 (Method B).9. Replace the stand cover. Ensure that all cables are neatly routed andpress the stand cover into place until you hear a click10. Put the phone in the wall-mount position (optional). If you wall-mounted your phone, put it in the wall-mount position by holding theTilt Lever and pressing the phone towards the base until the phone isparallel with the base. Release the Tilt Lever and continue to push thephone towards the base until you hear an audible click. Ensure thephone is securely locked in position.
