Nortel 1200 Series User Manual

Also see for 1200 Series: Installation

Contents

26 Chapter 3NN40050-111User-defined feature keysYour system administrator assigns the user-defined feature keys (on your IP Phone andexpansion module) as line, intercom, or memory keys. The label for each key appears on thedisplay next to the key. Your system administrator programs features on the line and intercomkeys. However, you can program certain features on the memory keys.The user-defined feature keys are not available on the IP Phone 1210.Memory keysYour system administrator assigns the user-defined feature keys as memory keys. Memory keysstore phone numbers or features to give you one-touch dialing or feature activation.Use the following procedures to program memory keys on your IP Phone 1210, 1220, and 1230and expansion modules.Programming external autodial1 Press the Feature key, and then enter *1.2 Press a memory key.3 Using the dialpad, enter the external number.4 Press OK to store the number.The programmed phone number shows on the display.Programming internal autodial1 Press the Feature key, and then enter *2.2 Press a memory key.3 Using the dialpad, enter the extension number.4 Press OK to store the extension number.The name assigned to the number shows on the display with Ad to indicate AutoDial.Programming a feature1 Press the Feature key, and then enter *3.2 Press a memory key.3 Press the Feature key, and then enter the feature code.4 Press OK to store the feature code.

/ 27

Related manuals for Nortel 1200 Series