Chapter 4 Configuring the management IP interface 69Nortel VPN Router Installation — VPN Router 1750Configuring the management IP addressYou use the serial interface to assign the VPN Router 1750 a management IPaddress and subnet mask so that you can then use a Web browser for management.To configure the management IP address using the serial interface:1 Turn on the terminal or PC.Configure the terminal or PC as follows:• 9600 baud• eight data bits• one stop bit• no parity• no flow control2 Connect the serial cable (supplied with the VPN Router 1750) from thegateway’s serial port to a terminal or to the communications port on a PC.3 On the PC, start HyperTerminal or another terminal emulation program, andpress Enter.The Nortel VPN Router window appears.Nortel VPN RouterCopyright (c) 1999-2005 Nortel Networks, Inc.Version: V07_0.024Creation date: Jul 6 2006, 08:23:16Unit Serial Number: 510649Please enter the administrator's user name:4 Enter the default user name and password for the administrator.The factory default user name is admin and the default password is setup. Theuser name and password are case sensitive.Please enter the administrator's user name: adminPlease enter the administrator's password: *****
