Nortel 2050 Installation Manual

Also see for Softphone 2050: User guide Installation and operation Installation and operation guide Fundamentals Fundamentals

22 Chapter 3 Installing the IP Software Phone 2050N0022555N0022555ServerIf your site uses DHCP:1 Select the Automatic (DHCP) option.Using DHCP is the default method of locating the call server.If DHCP is used, no further configuration is required.If you are not using DHCP:1 Clear the Automatic (DHCP) option.2 Select the Server type you wish to configure: Primary, Secondary or Application.3 Enter the IP address of the server.OrEnter the Name of the server.If you do not know the server name or IP address and port number, ask your call serveradministrator.Note: To use DHCP, you need a DHCP server with call server IP address valuesprogrammed as per the IP 2004.Note: Using DHCP may not be appropriate for mobile users. These users commonlywant to connect to their office communications server rather than the local officeserver.