Nortel 2210 User Manual

Also see for 2210: Installation and operation guide Fundamentals Fundamentals Installation and operation Installation and operation

Contents

Getting started 11Nortel Networks WLAN Handset 2210/2211 User GuideSelect Noise ModeThe Noise Mode option enables you to adjust the WLAN Handset for different levels of noisewithin the working environment.Select the Noise Mode:1 Press when in the standby state.2 Press the Up and Down buttons to scroll through the menu and highlight Noise Mode.3 Press the Select button (or OK) to select Noise Mode.4 Press the Up and Down buttons to scroll through the menu and highlight one of the followingsettings:• Normal: For most office environments (default).• High: For moderate background noise.• Severe: For extremely noisy conditions.5 Press the Select button (or OK) to select the setting.6 Do one of the following:• Press UP to return to the previous menu and set another option.• Press to exit all menus and return to the standby state.You can also press Exit from the top-level menu to exit the menu and return to the active(off-hook) state.Enter ExtensionThe Extension option enables the user to enter the extension number for the WLAN Handset. Thisnumber is used to identify the handset. It displays when the handset is in the standby state.Note: Nortel Networks recommends you enter the Directory Number (DN) of the system or thefull number of your handset. When the WLAN Handset is in the active (idle) state, the DN of thesystem displays.Enter the Extension number:1 Press when in the standby state.2 Press the Up and Down buttons to scroll through the menu and highlight Extension.3 Press the Select button (or OK) to select Extension.4 Enter the extension number using the handset keypad.5 Press Save to save your extension number.6 Do one of the following:• Press UP to return to the previous menu and set another option.• Press to exit all menus and return to the standby state.