Nortel 2212 Installation And Configuration Manual
Also see for 2212: Installation and operation guideFundamentalsFundamentalsUser guideUser guide
                                                                | |
Contents
|
Handset configuration Page 61 of 62WLAN Handset 2212 Installation and Configuration for VPNb. Set Mode to Aggressive.c. Select OK.8 Set your password.a. Select Network Config > Security > Static Entry > VPN > VPNClient IP > IKE Mode Config > Phase 1 - ISAKMP > PresharedKey > Alphanumeric.b. Enter your password.c. Select Save.9 Set the Phase 1 authentication parameters.a. Select Network Config > Security > Static Entry > VPN > VPNClient IP > IKE Mode Config > Phase 1 - ISAKMP.b. Select Diffie-Hellman > Group 1.c. Select OK.d. Select Auth. Hash > SHA1.e. Click OK.f. Select Encryption > 3DES.g. Click OK.10 Set Key ID.a. Select Network Config > Security > Static Entry > VPN > VPNClient IP > IKE Mode Config > Phase 1 - ISAKMP > Local ID > KeyID.b. Enter the key ID.c. Click Save.11 Set Phase 1 Lifetime.a. Select Network Config > Security > Static Entry > VPN > VPNClient IP > IKE Mode Config > Phase 1 - ISAKMP > Lifetime (sec).b. Enter 2678400.c. Click Save.12 Set Phase 1 Options.a. Select Network Config > Security > Static Entry > VPN > VPNClient IP > IKE Mode Config > Phase 1 - ISAKMP > Options. |
Related manuals for Nortel 2212
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine