Nortel 2221 Product Manual

Also see for 2220: Product support bulletin Using manual

Contents

Chapter 3 System Configuration 43Using the Nortel Networks Wireless LAN Access Point 2220/2221Change PasswordUse this section to change the password on the access point (Figure 18).Firmware UpgradeLocal - Click “Browse” to locate the downloaded firmware file and click “StartUpgrade” to start the upgrade process.Remote - Select FTP or TFTP, and enter firmware file name, the host IP address,user name, and password. (You need your user name and password only with theFTP.) Click “Start Upgrade” to start the upgrade process.For latest firmware version information, go to the Nortel Networks customersupport web site at: http://support.nortelnetworks.com/, select “Wireless LAN”and then “WLAN Access Point 2220” or “WLAN Access Point 2221” and then“Software.”Restore Factory SettingsClick the “Restore” button to load the factory default configuration and reboot thisdevice. Note that all user configured information will be lost. You will also have tore-enter the default user name (nortel) to regain management access to this device.Reset Access PointClicking on the “Reset” button to perform a hardware reset of the access point.Note: You must disable the radios prior to upgrading the Access Point2220/2221 or the upgrade may not occur.Note: Although current configurations will not be changed, you mustreset the time. (The default time setting is January 1 at midnight.)