International Regulatory Statements of ConformityThis is to certify that the Ethernet Routing Switch 2500 Series equipment was evaluated to the internationalregulatory standards for electromagnetic compliance (EMC) and safety and were found to have met the requirementsfor the following international standards:• EMC – Electromagnetic Emissions – CISPR 22, Class A• EMC – Electromagnetic Immunity – CISPR 24• Electrical Safety – IEC 60950, with CB member national deviationsFurther, the equipment has been certified as compliant with the national standards as detailed below.National Electromagnetic Compliance (EMC) Statements ofComplianceFCC statement (USA only)This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonableprotection against harmful interference when the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance withthe instruction manual, it may cause harmful interference to radio communications. Operation of this equipmentin a residential area is likely to cause harmful interference, in which case users will be required to take whatevermeasures may be necessary to correct the interference at their own expense.ICES statement (Canada only)Canadian Department of Communications Radio Interference RegulationsThis digital apparatus (Ethernet Routing Switch 2500 Series) does not exceed the Class A limits for radio-noiseemissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department ofCommunications.Règlement sur le brouillage radioélectrique du ministère des CommunicationsCet appareil numérique (le commutateur ERS 2500 Series) respecte les limites de bruits radioélectriques visantles appareils numériques de classe A prescrites dans le Règlement sur le brouillage radioélectrique du ministèredes Communications du Canada.CE marking statement (Europe only)EN 55022 statementThis is to certify that the Ethernet Routing Switch 2500 Series equipment is shielded against the generation ofradio interference in accordance with the application of Council Directive 89/336/EEC. Conformity is declaredby the application of EN 55022 Class A (CISPR 22).CAUTIONThis device is a Class A product. In a domestic environment, this device can cause radiointerference, in which case the user may be required to take appropriate measures. Fortranslations of this message, see "Deutsche" (page 23), "Español" (page 31),"Français"(page 39), and "Português" (page 47)EN 55024 statementThis is to certify that the Ethernet Routing Switch 2500 Series are shielded against the susceptibility to radiointerference in accordance with the application of Council Directive 89/336/EEC. Conformity is declared by theapplication of EN 55024 (CISPR 24).EN 300386 statementThe Ethernet Routing Switch 2500 Series complies with the requirements of EN 300386 V1.3.1 for emissions andfor immunity for a Class A device intended for use in either Telecommunications centre or locations other thantelecommunications centres given the performance criteria as specified by the manufacturer.