Nortel 4526 Installation Manual

Also see for 4526FX: Overview-System Configuration Installation guide Configuration Product information

Contents

Nortel 4526 Installation Manual Manual pdf 21 page image

Selecting an SFP 21The SFPs described in this section do not have Digital Diagnostic Interfacecapability, and are RoHS -E5 compliant.CWDM SFPS are also supported. CWDM technology consolidatesmultiple optical channels on a common optical fiber. CWDM uses multiplewavelengths to expand available bandwidth.CWDM SFPs are designed to support high speed data communicationsfor Metropolitan Area Networks (MANs). The system uses a grid of eightCWDM optical wavelengths in both ring and point-to-point configurations.All components are color-coded by wavelength.ATTENTIONThe attainable cable length can vary depending on the quality of the fiber opticcable used.SFP models without DDI supportModel and connector Product number Description1000BASE-SX (LC) AA1419013-E5 850 (nm), up to 275 or 550 m1000BASE-SX (MT-RJ) AA1419014-E5 850 nm, up to 275 or 550 m1000BASE-LX (LC) AA1419015-E5 1310 nm, up to 10 km1000BASE-XD CWDM (LC) AA1419025-E5 toAA1419032-E51470 nm to 1610 nm, up to 40 km1000BASE-ZX CWDM (LC) AA1419033-E5 toAA1419040-E51470 nm to 1610 nm, up to 70 km100BASE-FX (LC) AA1419074-E61310 nanometers (nm), up to 2 kmSupported by the 4526FX, 4526T,4526T-PWR, 4550T, 4550T-PWRand 4524GTT1 (RJ-48C) AA1419075-E61.544 Mbit/s Fast Ethernet to T1remote bridge. Supported by the4526FX, 4526T, 4526T-PWR,4550T, 4550T-PWR and 4524GTFor specifications for these SFPs, see "SFP specifications" (page 33).Procedure job aid: SFP models with DDI supportAny Digital Diagnostic Indicating (DDI) SFP can be used in any EthernetRouting Switch 4500 Series module that supports SFPs. The opticalfunctions of the SFP are supported. Access to the DDI information will beprovided in a future release.Ethernet Routing Switch 4500 SeriesInstallation — SFPs and XFPsNN47205-301 (324186-A) 01.04 Standard5.1 6 December 2007Copyright © 2007, Nortel Networks.