Nortel 5100 User Manual
Also see for 5100 Series Release 2.3.3: User guideIntegration guideInstallation and commissioningUser guideRelease note
                                                                  | |
Contents
| 
26 First time installation of the IP Phone 15352 Select Logout, and press OK.—End—Connecting the IP Phone 1535 to the LANStep Action1 Insert the RJ-45 cable into the LAN port at the back of the IP Phone1535. For more information, see2 Connect the other end of the LAN cable into an active LANconnection port on the network.—End—Enabling the LAN connection profileTo establish an active network connection, you must configure the IP Phone1535 to operate in either of two network connection profiles: LAN or WiFi.The IP Phone 1535 is preconfigured to make a network connection usingLAN over an Ethernet switch or router. Thus, the LAN connection profile isenabled on the IP Phone 1535 by default.Step Action1 From the Main Menu, select Settings >Profile and press OK.2 Select LAN >Enable (the LAN connection profile is enabled on theIP Phone 1535 by default).3 When asked to confirm the change, select Yes to accept.—End—Accessing and modifying the LAN Network SettingsTo configure the IP Phone 1535 with network settings particular to your LANenvironment, you must access and configure the parameters of the NetworkSettings option. With the LAN Network connection profile enabled, you canaccess and configure the parameters of the Network Settings configurationoptions:Nortel Multimedia Communications Server 5100Nortel IP Phone 1535 Installation and CommissioningNN43160-300 00.13 PreliminaryRelease 4.0 22 August 2007Copyright © 2007, Nortel Networks. |
Related manuals for Nortel 5100 Series Release 2.3.3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine