Nortel 600 Series Manual

Also see for BayStack 600 Series: User guide Installation hardware Install guide Installation Reference guide

August 2006 08.01 NTP 297-3601-316For Generic 602.201-1Section 1: Introduction1Scope and purpose of this publicationThis Nortel technical publication (NTP) contains the necessary information forsetting dual in-line package (DIP) switches on printed circuit packs and balancingnetworks equipped in the DMS-10 switch.1OrganizationSection 2 includes information on switch settings for the circuit packs; the switchsetting information is arranged alpha-numerically according to pack code. Section 3provides information on switch settings for balancing networks; this information isarranged alpha-numerically according to product code.The switch setting information for each circuit pack or balancing network includes thefollowing:• a simplified outline drawing that identifies each DIP-switch and indicatesits approximate position on the pack or balancing networkNote: Since the purpose for these drawings is to indicate DIP-switchpositions, physical components located on the faceplate of the pack, suchas LEDs, light pipes, and switches, are not depicted. For information aboutthese components, refer to NTP 297-3601-500, General MaintenanceInformation.• tables indicating the various switch-selectable options and the necessarysettings for each option1Notational conventionsAll tables in this publication use the following notational convention:“0" indicates that the switch is in the OFF position.“1" indicates that the switch is in the ON position.“-” indicates “not applicable” and that the position of the switch is irrelevant.