Nortel 8000 Series Installing And Maintaining
Also see for 8000 Series: Reference guideQuick start guideInstalling
                                                                                                            | |
Contents
|
28 Chassis installation fundamentalsIf you do not install a BIP, see the system power specifications for the8004DC or 8005DC power supply in "Technical specifications" (page 85).Environmental requirementsThe installation site must meet the environmental requirements shown inTable 5 "Environmental requirements" (page 28).Table 5Environmental requirementsEnvironmental specificationsOperating temperature – 5 to 55 C (23 to 131 F)Storage temperature – 40 to 70 C (– 40 to 158 F)Operating humidity 90%Storage humidity 92.5%Operating altitude 13 123 ft at 35 C and 45 C6000 ft at 55 C– 200 ft at 55 CStorage altitude 40 000 ftHardware requirementsThis section includes information about the hardware shipped with the8010co, 8010, 8006, and 8003 chassis.8010, 8006, and 8003 chassisThe following table is a checklist of items included in the shipment container.Table 6Accessories shipped with the 8010, 8006, and 8003 chassisCheck Accessory Part number UsageBracket kit with• Two rack-mounting brackets• Phillips-head screwsPrepare the chassis forinstallation in an equipmentrack.Screw package Mount the chassis in anequipment rack.Side cable management brackets• two brackets for the 8010chassis• one bracket each for the 8006and 8003 chassisDS1411013 Manage network interfacecables.Nortel Ethernet Routing Switch 8600Installing and Maintaining the Ethernet Routing Switch 8000 Series ChassisNN46205-303 01.02 Standard4.1 10 January 2008Copyright © 2008, Nortel Networks. |
Related manuals for Nortel 8000 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine